一.在linux下安装启动iscsi target

1.安装启动iscsi服务
[root@wjb10000 ~]# yum -y install targetcli.noarch

2.建立一个目录设置为iscsi设备
[root@wjb10000 ~]# mkdir /iscsi_disks

3.设置target

[root@wjb10000 ~]# targetcli
Warning: Could not load preferences file /root/.targetcli/prefs.bin.
targetcli shell version 2.1.fb41
Copyright 2011-2013 by Datera, Inc and others.
For help on commands, type 'help'.
 
/> cd backstores/fileio
/backstores/fileio> create disk01 /iscsi_disks/disk01.img 20G
Created fileio disk01 with size 21474836480
/backstores/fileio> cd /iscsi
/iscsi> create iqn.2016-06.wjb.com:storage.target0
Created target iqn.2016-06.wjb.com:storage.target0.
Created TPG 1.
Global pref auto_add_default_portal=true
Created default portal listening on all IPs (0.0.0.0), port 3260.
/iscsi> cd iqn.2016-06.wjb.com:storage.target0/tpg1/portals/
/iscsi/iqn.20.../tpg1/portals> create 192.168.1.50
Using default IP port 3260
Could not create NetworkPortal in configFS
/iscsi/iqn.20.../tpg1/portals> delete 0.0.0.0 3260
Deleted network portal 0.0.0.0:3260
/iscsi/iqn.20.../tpg1/portals> create 192.168.1.50
Using default IP port 3260
Created network portal 192.168.1.50:3260.
/iscsi/iqn.20.../tpg1/portals> cd ../luns
/iscsi/iqn.20...et0/tpg1/luns> create /backstores/fileio/disk01
Created LUN 0.
/iscsi/iqn.20...et0/tpg1/luns> cd ../acls
/iscsi/iqn.20...et0/tpg1/acls> create iqn.2016-06.wjb.com:www.server.com
Created Node ACL for iqn.2016-06.wjb.com:www.server.com
Created mapped LUN 0.
/iscsi/iqn.20...et0/tpg1/acls> cd iqn.2016-06.wjb.com:www.server.com/
/iscsi/iqn.20...ww.server.com> set auth userid=username
Parameter userid is now 'username'.
/iscsi/iqn.20...ww.server.com> set auth password=password
Parameter password is now 'password'.
/iscsi/iqn.20...ww.server.com> exit
Global pref auto_save_on_exit=true
Last 10 configs saved in /etc/target/backup.
Configuration saved to /etc/target/saveconfig.json

4.设置防火墙

[root@wjb10000 ~]# vim /etc/firewalld/services/iscsi.xml
<"1.0" encoding="utf-8"?>
<service>
<short>ISCSI</short>
<description>ISCSI protocal</description>
<port protocal="tcp" port="3260">
</service>
[root@wjb10000 ~]# firewall-cmd --permanent --add-service=iscsi
[root@wjb10000 ~]# firewall-cmd --reload

5.启动服务

[root@wjb10000 ~]# systemctl enable target.service
Created symlink from /etc/systemd/system/multi-user.target.wants/target.service to /usr/lib/systemd/system/target.service.
[root@wjb10000 ~]# systemctl start target.service

6.查看端口

[root@wjb10000 ~]# netstat -lnp | grep 3260
tcp    0   0 192.168.1.50:3260    0.0.0.0:*        LISTEN   -  

二.在linux下安装启动iscsi initiator

1.安装 iscsi-initiator-utils服务
[root@wjb10000 ~]# yum install iscsi-initiator-utils

2.修改配置文件

[root@wjb10000 ~]# vim /etc/iscsi/initiatorname.iscsi 
InitiatorName=iqn.2016-06.wjb.com:www.server.com
[root@wjb10000 ~]# vim /etc/iscsi/iscsid.conf 
#node.session.auth.authmethod = CHAP
#node.session.auth.username = username
#node.session.auth.password = password      //去掉注释

3.启动服务

[root@wjb10000 ~]# systemctl start iscsid
[root@wjb10000 ~]# systemctl enable iscsid

4.发现target

[root@wjb10000 ~]# iscsiadm -m discovery -t sendtargets -p 192.168.1.50

5.查看状态

[root@wjb10000 ~]# iscsiadm -m node -o show

6.登录target建立连接

[root@wjb10000 ~]# iscsiadm -m node --login
Logging in to [iface: default, target: iqn.2016-06.wjb.com:storage.target0, portal: 192.168.1.50,3260] (multiple)
Login to [iface: default, target: iqn.2016-06.wjb.com:storage.target0, portal: 192.168.1.50,3260] successful.

7.查看连接情况

[root@wjb10000 ~]# iscsiadm -m session -o show
tcp: [1] 192.168.1.50:3260,1 iqn.2016-06.wjb.com:storage.target0 (non-flash)

8.磁盘操作

[root@wjb10000 ~]# fdisk -l
 
磁盘 /dev/sda:107.4 GB, 107374182400 字节,209715200 个扇区
Units = 扇区 of 1 * 512 = 512 bytes
扇区大小(逻辑/物理):512 字节 / 512 字节
I/O 大小(最小/最佳):512 字节 / 512 字节
磁盘标签类型:dos
磁盘标识符:0x000b2ba1
 
  设备 Boot   Start     End   Blocks  Id System
/dev/sda1  *    2048   1026047   512000  83 Linux
/dev/sda2     1026048  62466047  30720000  83 Linux
/dev/sda3    62466048  103426047  20480000  83 Linux
/dev/sda4    103426048  209715199  53144576  5 Extended
/dev/sda5    103428096  144388095  20480000  83 Linux
/dev/sda6    144390144  152582143   4096000  82 Linux swap / Solaris
/dev/sda7    152584192  209715199  28565504  83 Linux
 
磁盘 /dev/sdb:21.5 GB, 21474836480 字节,41943040 个扇区
Units = 扇区 of 1 * 512 = 512 bytes
扇区大小(逻辑/物理):512 字节 / 512 字节
I/O 大小(最小/最佳):512 字节 / 8388608 字节
 
[root@wjb10000 ~]# parted --script /dev/sdb "mklabel msdos"
[root@wjb10000 ~]# parted --script /dev/sdb "mkpart primary 0% 100%"
[root@wjb10000 ~]# mkfs.xfs -i size=1024 -s size=4096 /dev/sdb1
meta-data=/dev/sdb1       isize=1024  agcount=4, agsize=1310208 blks
     =            sectsz=4096 attr=2, projid32bit=1
     =            crc=0    finobt=0
data   =            bsize=4096  blocks=5240832, imaxpct=25
     =            sunit=0   swidth=0 blks
naming  =version 2       bsize=4096  ascii-ci=0 ftype=0
log   =internal log      bsize=4096  blocks=2560, version=2
     =            sectsz=4096 sunit=1 blks, lazy-count=1
realtime =none          extsz=4096  blocks=0, rtextents=0
[root@wjb10000 ~]# mount /dev/sdb1 /mnt/
[root@wjb10000 ~]# df -hT
文件系统    类型   容量 已用 可用 已用% 挂载点
/dev/sda3   xfs    20G  68M  20G  1% /
devtmpfs    devtmpfs 904M   0 904M  0% /dev
tmpfs     tmpfs   913M   0 913M  0% /dev/shm
tmpfs     tmpfs   913M 8.7M 904M  1% /run
tmpfs     tmpfs   913M   0 913M  0% /sys/fs/cgroup
/dev/sda5   xfs    20G 1.5G  19G  8% /usr
/dev/sda7   xfs    28G  33M  28G  1% /home
/dev/sda2   xfs    30G 694M  29G  3% /var
/dev/sda1   xfs    497M 128M 370M  26% /boot
tmpfs     tmpfs   183M   0 183M  0% /run/user/0
/dev/sdb1   xfs    20G  33M  20G  1% /mnt

以上就是小编为大家带来的linux配置ISCSI服务器的方法全部内容了,希望大家多多支持~

标签:
linux,iscsi,配置

免责声明:本站文章均来自网站采集或用户投稿,网站不提供任何软件下载或自行开发的软件! 如有用户或公司发现本站内容信息存在侵权行为,请邮件告知! 858582#qq.com
白云城资源网 Copyright www.dyhadc.com

评论“linux配置ISCSI服务器的方法”

暂无“linux配置ISCSI服务器的方法”评论...

稳了!魔兽国服回归的3条重磅消息!官宣时间再确认!

昨天有一位朋友在大神群里分享,自己亚服账号被封号之后居然弹出了国服的封号信息对话框。

这里面让他访问的是一个国服的战网网址,com.cn和后面的zh都非常明白地表明这就是国服战网。

而他在复制这个网址并且进行登录之后,确实是网易的网址,也就是我们熟悉的停服之后国服发布的暴雪游戏产品运营到期开放退款的说明。这是一件比较奇怪的事情,因为以前都没有出现这样的情况,现在突然提示跳转到国服战网的网址,是不是说明了简体中文客户端已经开始进行更新了呢?